■ Chapter 4 Editing a recorded performance (track
editing)
This chapter explains the procedure for Òediting sound,Ó something which was not possible on
conventional tape MTR units.
■ Chapter 5 Use with MIDI devices
This chapter explains the procedures for using the VS-880 in conjunction with MIDI devices. Read
this chapter when you wish to use the VS-880 in synchronization with other MIDI devices.
■ Chapter 6 Use with a Zip drive
This chapter explains the procedures for using the VS-880 with a Zip drive. Read this chapter when
you wish to use a Zip drive to record a performance. This chapter also explains how to use the VS-
880 with a hard disk or magneto-optical disk.
■ Chapter 7 Use with a DAT recorder
This chapter explains the procedures for using the VS-880 in conjunction with a DAT recorder.
Read this chapter when you wish to save your performance on a DAT recorder.
■ Chapter 8 Using the internal effects
This chapter explains the operating procedures when a VS8F-1 effect expansion board is installed.
Read the VS8S-1 ownerÕs manual in conjunction with this chapter.
■ Chapter 9 Other convenient functions
This chapter explains operation of functions which were not discussed in earlier chapters, such as
sounding the metronome during recording, or when a foot switch is connected.
■ Chapter 10 Overall settings and status checking
This chapter explains how to make the settings which affect the overall operation of the VS-880.
■ Chapter 11 Taking advantage of the VS-880 (ideas
and examples)
This chapter combines some of the functions discussed in earlier chapters, and gives some actual
examples of how you can take advantage of the VS-880.
■ Appendices
This chapter contains material which will help you make the best use of the VS-880, such as
ÒTroubleshootingÓ and ÒError message list.Ó
Introduction
5
To Next Page
Loading...
