Roland VXpanded VS-880 - Moving to a Stored Time Location; Modifying a Stored Time Location; Deleting a Stored Time Location

■ Moving to a stored time location
1. Use the LOC buttons to specify the locate point of the time to which you want to move.
■ Modifying a stored time location
1. Move to the Locate Point that you wish to modify. Press [LOC1/5]–[LOC4/8].
2. Press [LOCATOR] several times until “LOC Loc ✱” appears (✱ will be the locate point number
that you wish to modify).
3. Input the desired time. Rotate the TIME/VALUE dial.
■ Deleting a stored time location
1. While holding down [CLEAR], use the LOC buttons to specify the locate point that you wish to
clear. When a locate point has been cleared, the button indicator will go dark.
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIMETIME
48
24
4
0
dB
1122
Chapter 2 Before you start (VS-880 terminology)
58