5.3
Walk boost mode
Long Press and hold , the electric bicycle enters the walk boost mode. The electric bicycle will walk at a fixed speedof 6 km per hour and the display shows . Release the button to stop the power output immediately
and restore to the state before walk boost.（ Some protocols do not support this function）
Figure 5-3 Helping to implement the display screen
The walk boost mode can only be used when pushing the electric bicycle, please do not use it while riding.
5.4
Turning on/off lights
Press the to make the controller turn on the lights and the display backlight becomes dim. Press again to make the controller turn off the lights and the backlight restore brightness.
Figure 5-4Backlight display interface
To Next Page
Loading...
