03P is the rated voltage setting. The available rated voltage range is: 24V, 36V, 48V.
Press to enter the parameter changing state. Press the
/
to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.
Figure 6-3 Rated voltage setting interface
6.4
Auto Sleep Time Setting
04P is the auto sleep time setting. To save the battery power and reach higher range, this display will be turned off after it has not been used for a time. The adjustable range is: 1~60min, 00 means no auto
shutdown. The factory default setting is 10 minutes.
Press to enter the parameter changing state. Press the
/
to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.
To Next Page
Loading...
