Figure 6-18 Controller cruise control function setting interface
7.Shortcut operation
• 7.1 Restore factory settings operation
dEF is the restore factory default parameter settings. dEF-Y is to restore the factory default settings, and dEF-N is notto restore.
Enter into the main setting interface and keep the speed at 0, press and hold
and
simultaneously for 2s to
enter the restore factory default setting interface. Pressing
/
to toggle to dEF-Y. Then after pressing to confirm, the display will show dEF-0 for a few seconds and then automatically start to restore the
factory default settings.The display will automatically exit to setting interface after the restoration.
Figure 7-1 Restore Factory Default Settings Interface
To Next Page
Loading...
