Instructions for cleaning
Caution: this operation requires special precautions in addition to those cited
throughout this document (pages 3, 17, 20 and 26 in particular) and in this chapter.
Mandatory:
Ensure the machine is stopped and the discharge of the device is
complete.
Use the side ladder for this purpose
Warning, there is no means of access to the interior of the vehicle.
If, however, an intervention inside the body is required, equipment (not
supplied) type scaffolding must be used to enter, with railings and other safety
precautions. In general, all interventions higher than the floor must be done with
adequate means of access.
All interventions, which are more toward the back of the machine, must
be done with the machine off, PTO disconnected and using personal protective
equipment (goggles, gloves etc..) recommended for the use of specific tools by
their manufacturer for example :
High pressure cleaner for washing the screws and beaters
A cutting tool to cut the strings
Etc
The rotation of the bed and all other functions (slurry door, hood) are
sometimes necessary. All our machines permit these functions independently of
the rotation of the PTO. This ensures the non-rotation of moving parts particularly
with the " autonomous control". In fact in the latter case, a connection kit comes
with the machine (see pages 10 to 13) to allow the bed to be supplied directly
with oil from the tractor.