Silage Door « LOULOU »
After having smeared with grease, install the side panels. The grease
facilitates their mounting and demounting because adjustments are optimized
to ensure the tightness of the assembly. Fix to the body of the spreader using
the bolts provided.
On the ground assemble the panel with the top rail by means of the
axes provided. Be careful to put in place the pins to lock the assembly.
By means of a crane, a hoist or a loader put the assembly in place,
panel + traverses. Then fasten the side panels using the bolts provided.
Complete by installing the cylinders with the drum on the body side.
For all operations carried out at heights, a means of access, type scaffolding,
must be available, respecting the standards for this type of equipment and
respecting the standards for this type of product (railings, etc ...).
The cylinders for opening the silage door "LOULOU" are fitted with
dual control valves. Beware of any residual pressure present
between the valve and cylinder.
To Next Page
Loading...