Rollei Compactline 10x - Settings; To set the flash:

61
Settings
To set the flash:
1. Press the Right button / Flash button.
2. Press the flash button until the symbol appears. This turns off the flash function. 3.
Press the flash button again until the symbol appears on the LCD screen. This means that
the flash LED will flash always.
3. Press the flash button again until the symbol appears on the LCD screen. This means that
the flash LED is always flashing.
4. The symbol appears on the LCD screen. This activates the automatic flash. This is the
default flash setting.
Note: The LCD screen will display a low battery warning if the battery power is insufficient to
operate the flash.