Rollei DF-S 310 SE User Manual

5
3. Negative holder loading method
Hold up the negative toward the light. Face
the right side of the negative to yourself.
Take out negative holder out. Let the side with
“open” logo face yourself, and let the side with “
◄
”logo face down. Open the negative holder,
then place negative into recessed area in the
holder.Close the negative holder and press the
edges so that it locks in place
Insert the negative holder into the slot on the
right side of the lm scanner .

Rollei DF-S 310 SE Specifications

General

Display	LCD
Scanner type	Film/slide scanner
Product color	Black
Built-in display	Yes
Display diagonal	2.4 \
Duplex scanning	-
Input color depth	10 bit
Maximum scan size	- mm
Optical scanning resolution	- DPI
Internal memory	128 MB
Daily duty cycle (max)	- pages
Compatible memory cards	SD, SDHC
USB version	2.0
Standard interfaces	USB 2.0
Input voltage	5 V
Power supply type	AC/USB
Cables included	AV, USB

Weight and Dimensions

Depth	105 mm
Width	91 mm
Height	104 mm
Weight	276 g