6
Putting on
Turn on the thermostat control knob (n°2 on picture) on the wished position: the
green pilot light (n°1 on picture) ignites: the machine is on. And the orange pilot
light (n°3 on picture) ignites. The machine is warming up. Once orange pilot light
(n°3 on picture) is off, the machine reached the wished temperature. Grease the
plate before each cooking.
Temperature setting
Set the temperature by positioning the thermostat (n°2 on picture) to the desired
temperature. The orange pilot light (n°3 on picture) switches on if a higher level of
temperature is required and switches off when the same is reached.
It is not necessary to leave the device switched on at full power. It is necessary
to adapt the temperature to products to be cooked to limit the energy consump-
tion.
Stopping the appliance
Set thermostat control knob (n°2 on picture) on 0: the appliance is no longer func-
tioning.
Let the device cool
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
During non-prolonged use, we recommend you to grease the plate
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the
complete reference of your device (commercial name, type and serial number). This
information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- Clean your crepe machine regularly after each use to avoid phenomenon of cala-
mine coming the cooking of the sugar and from some dough which accumulates very
quickly, and creates a film on the plate which harms in the quality of the cooking.
15
To Next Page
