3
IMPORTANT SAFETY
INSTRUCTIONS
The RD55 Econ must be installed
and operated in accordance with
the instructions supplied; failure
to do so could result in damage
to your door and compromise
your safety.
These fitting instructions are for guidance only, you should always assess your garage
construction for installation as each garage & opening has its own specific needs.
Please read these instructions carefully and in full before commencing the
installation of the roller garage door.
WARNING AND GUIDANCE NOTES
1
At least TWO people are required to install
this product.
2
Prior to installing please remove all rings,
watches and sharp objects to avoid any
possibility of damage.
3
Prior to installing please remove any
items of loose clothing to avoid any risk of
entanglement or injury.
4
Your door comes complete with a 3 pin plug
as standard (this is supplied and must be
fitted with a 13amp fuse) which should be
plugged straight into a 13amp 3 pin switched
socket in the vicinity of your door, should you
need any extra electrical work. This must be
carried out by a suitably qualified person, if
you have any doubts please consult
an electrician.
5
Your receiver box should be installed in
a location that is at a comfortable height to
operate the push buttons, but out of the easy
reach of children.
6
Please do not allow children to operate the
push buttons or remote control fobs, as
serious injury can occur from misuse.
7
Warning: you must have a clear line of sight
of the whole of your roller garage door when
the door is in operation. Failure to do so may
result in harm to persons or damage to your
roller garage door.
To Next Page
