Rollerdor RD55 - Remote Control Handset Procedures; Programming Remote Control Handsets; Deleting Remote Control Handset Memory; Battery Replacement for Handsets

1. PREPARING SITE FOR INSTALLATION
1
Check all the measurements of your new
garage door against your order confirmation
and double check your opening size to
make sure everything is correct (fig.1.1) &
(fig.1.2).
2
Carefully remove your old garage door and
frame if applicable.
3
Sweep down the sides and lintel with a stiff
brush and clear all debris.
4
Make sure the opening is free from any raised
metal or brick work.
fig.1.1
fig.1.2
Rollerdor RD55 Econ Roller Garage Door
4