To Next PageTo Next Page
Need help?Do you have a question about the RolloTube Rademacher DuoFern and is the answer not in the manual?
Warns about dangers of electric shock when working on electrical connections.
Highlights important safety instructions requiring particular attention and careful following.
Stresses qualified electricians for electrical work and adherence to instructions.
Warns about risks from faulty equipment and unintended motor starts.
Defines intended use, operating conditions, and highlights incorrect usage risks.
Lists key features like self-learning, Safe-Drive, and detection systems.
Explains the bidirectional data exchange in the DuoFern network.
Motor stops and reverses if an obstacle is detected during opening.
Motor stops and briefly reverses if an obstacle is detected during closing.
Covers voltage, cable routing, accessibility, and mounting cautions.
Addresses motor sizing, fastening security, and necessity of configured end points.
Instructions for horizontally mounting the bearing for proper roller shutter movement.
Steps to measure and cut the rotating union to the correct size.
Guides on attaching and removing the adapter, ensuring correct groove positioning.
Attaching the catch for automatic end point configuration and obstacle detection.
Attaching the catch without freewheeling, disabling detection features.
Steps to remove the catch using the retaining clip.
Guides on inserting the motor into the union, warning against force.
Details on preparing aluminium precision tubes, including groove sawing.
Steps to drill and secure the precision tube to the catch.
Instructions for placing the bearing capsule and ball bearing.
Covers mounting the drive head into different bearing types.
Attaching the casing using fastening springs and hook-in brackets.
Emphasizes installing stoppers to prevent damage.
Stresses qualified electricians, circuit-breakers, and proper wiring.
Advises on cable routing to prevent water ingress and mechanical damage.
Instructions for feeding the cable and identifying wire functions.
Shows how to connect the motor to mains and optional switch.
Explains local control via a 1-pole switch and its sequence.
Guides on using the unit for end point configuration.
Lists configuration options and highlights motor cable safety.
Explains the link between the catch and lower end point detection.
Step-by-step guide for automatic end point configuration.
Notes on initial setup using set button, cord switch, or external switch.
Steps for manually setting the upper limit.
Process for automatically setting the upper limit and manually setting the lower limit.
Step-by-step guide for manual setting of both end points.
Instructions for manual setting directly via the motor's set button.
Mentions setting end points via transmitters, with safety warnings.
Checks configuration and explains how to modify end points.
Steps to reset to factory defaults and re-enable auto adjustments.
Covers motor failure to start, stopping during configuration, or stopping between end points.
Addresses automatic lower end point failures and shutters stopping during movement.
Provides detailed technical data for different motor models.
Confirms compliance with European directives.
Explains the necessity and methods for pairing transmitters.
Step-by-step guide for pairing/unpairing using the motor's set button.
Detailed instructions for using the radio code to manage transmitter connections.
Steps to activate modes, select actuator details, and name the motor.
Details what the 5-year warranty covers and what is excluded.
General