To Next PageTo Next Page
Need help?Do you have a question about the RolloTube RADEMACHER Series and is the answer not in the manual?
Betriebsanleitung von RADEMACHER Rohrmotoren.
Instrucciones de uso y de montaje de los motores tubulares RADEMACHER.
Mode d'emploi et d'installation des moteurs tubulaires RADEMACHER.
Operating and Assembly Manual for RADEMACHER Tubular Motors.
Gebruiks- en montagehandleiding bij RADEMACHER buismotoren.
Welcomes customers and introduces the RADEMACHER tubular motors.
Explains the meaning of various warning and informational symbols used in the manual.
Details CE mark, conformity with directives, and applicable standards.
Covers electrical hazards, compliance, device integrity, and uncontrolled movement risks.
Addresses improper use, child safety, roller shutter monitoring, and burn risks.
Provides a diagram and list of components for the overall view of the motor system.
Specifies electrical connection requirements and power supply needs.
Details voltage checks, cable management, protection of parts, and drive/bearing selection.
Highlights risks from incorrect fastening, unconfigured end points, and awning safety.
Guides on positioning bearings and determining winding shaft length for installation.
Details the steps for assembling and disassembling adapters and drivers for the motor.
Instructions for preparing precision tubes, including notching and motor insertion.
Covers drilling fixing holes, securing the tube, and inserting the roller capsule.
Explains installing the motor's drive head and winding shaft into respective bearings.
Covers safety instructions for electrical connection, wiring, and short circuit prevention.
Provides the wiring diagram and color codes for connecting the motor.
Guides on initial motor test run and assembling the roller shutter curtain.
Details the procedure for setting the motor's lower limit stop.
Details setting the upper limit stop, including a safety margin for temperature changes.
Advises on checking settings and explains motor thermal protection limits.
Explains how to use the emergency hand crank and the necessary safety precautions.
Addresses issues like motor not running, incorrect rotation, or stopping during operation.
Covers stopping due to thermal protection, obstacles, or end stop problems.
Provides detailed technical specifications for different motor series and types.
Outlines what the 60-month warranty covers and lists common exclusions.
General