What to do if my Rommelsbacher kitchen appliance does not work?
If your Rommelsbacher kitchen appliance isn't working, check the following: * Ensure the power cord and plug are not damaged. Do not use the appliance if they are damaged. * Verify that the plug is correctly connected to the socket. * Test the socket by plugging in another appliance. * Make sure the glass jug is correctly positioned on the base unit.
Why Rommelsbacher kitchen appliance switches off after a short time?
If your Rommelsbacher kitchen appliance switches off quickly, the cooling period between preparation cycles might be too short. Allow the appliance to cool down for at least 2 minutes before trying to switch it on again.
Why is my Rommelsbacher kitchen appliance milk froth not satisfying?
If the milk froth from your Rommelsbacher kitchen appliance is not satisfactory: * Ensure the milk is cold and skimmed. * Use function “2“ – warm frothing at. 60 °C. * Verify that you're using the serrated stirrer.
What to do if milk spills over in Rommelsbacher kitchen appliance?
To prevent milk spillage in your Rommelsbacher kitchen appliance, observe the maximum filling quantities: * For frothing milk: 300 ml * For stirring milk: 400 ml
How to reduce operating noise of Rommelsbacher MS 650 Kitchen Appliances?
To reduce the operating noise of your Rommelsbacher kitchen appliance: * Check that the glass jug sits right in the middle of the base. Slightly turn or move the jug to and fro to potentially reduce the noise. * Ensure the stirrer sits correctly on the take-up pin. * Check if the noise persists with the second stirrer (stored at the underside of the base). If the noise remains loud, contact your service-point.
Why milk does not become hot enough in Rommelsbacher kitchen appliance?
The maximum temperature in function “3” of your Rommelsbacher kitchen appliance is 70 °C. Higher temperatures cannot be reached with this appliance.
General| Brand | Rommelsbacher |
|---|---|
| Model | MS 650 |
| Category | Kitchen Appliances |
| Language | English |
Welcomes user, explains intended domestic use for frothing, heating, and stirring milk.
Details nominal voltage, power, standby consumption, and filling quantities for the appliance.
Instructions on recycling packing material and explanation of plastic markings.
Advises on keeping children away, supervision, not leaving unattended, and handling power cords.
Warns about hot surfaces, hot liquids, glass breakage, and proper handling of the jug.
Describes the appliance's 3 temperature levels for making milk froth, heating, and stirring.
Explains the sensor button, indicator lights, and filling quantity markings on the glass jug.
Outlines steps for unwinding the cord, attaching the stirrer, filling the jug, and placing it on the base.
Details the magnetic drive, heating function, recommended milk, and cooling intervals between operations.
Describes the cold, warm, and hot functions, including sensor button presses and automatic shut-off.
Instructions on removing froth/liquid, placing the jug, unplugging, and cleaning after use.
Provides guidelines for cleaning the appliance, jug, and accessories, including warnings.
Lists common issues like operating noise, non-functionality, and milk frothing problems with solutions.
To Next Page