25
2. Removing the glass jug
• Before disassembling the appliance, make sure it is switched off. To do so, turn the rotary knob to the
left to position „0“ and disconnect the power plug.
• Screw the glass jug off once the blades of the blade unit stand still.
Screw the glass jug off by screw-
ing the blade unit anticlockwise.
Attention! Don´t screw the glass
jug itself as it may loosen from
the blade unit.
Remove the glass jug from the
base unit when the white mark
of the blade unit is located above
the arrow-mark of the base unit.
Empty the glass jug completely
before removing the blade unit.
Screw the blade unit clockwise
until it can be detached from the
glass jug.
Pay attention to dripping liquids
when removing the glass jug
from the blade unit.
MX200_MX250 - 06_2016_print.indd 25 17.06.2016 08:36:40
To Next Page
Loading...
