Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
on the blade unit before the
cup sticks correctly in the
In order to avoid spilling over, t
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
Do not at all operate this unit with an external timer or a separate
Be careful when processing liquids. Liquids may spout
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
on the blade unit before the
blade unit is tightly screwed together with the glass
cover is firmly placed on the glass
cup sticks correctly in the
In order to avoid spilling over, t
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
Do not at all operate this unit with an external timer or a separate
load operation and do not handle it
Be careful when processing liquids. Liquids may spout
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
it must always be placed.
on the blade unit before the
blade unit is tightly screwed together with the glass
cover is firmly placed on the glass
cup sticks correctly in the
In order to avoid spilling over, t
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
cked, switch off the appliance immediately and pull
Do not at all operate this unit with an external timer or a separate
load operation and do not handle it
Be careful when processing liquids. Liquids may spout
tion. There is the hazard of burns with
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
it must always be placed.
on the blade unit before the
blade unit is tightly screwed together with the glass
cover is firmly placed on the glass
cup sticks correctly in the
In order to avoid spilling over, t
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
cked, switch off the appliance immediately and pull
the blocking ingredients only afterwards
Do not at all operate this unit with an external timer or a separate
load operation and do not handle it
Be careful when processing liquids. Liquids may spout
tion. There is the hazard of burns with
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
correctly. This applies especially for the
it must always be placed.
on the blade unit before the
blade unit is screwed together with the
blade unit is tightly screwed together with the glass
cover is firmly placed on the glass
cup sticks correctly in the
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
cked, switch off the appliance immediately and pull
the blocking ingredients only afterwards
Do not at all operate this unit with an external timer or a separate
load operation and do not handle it
Be careful when processing liquids. Liquids may spout
tion. There is the hazard of burns with
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
correctly. This applies especially for the
it must always be placed.
blade unit is screwed together with the
blade unit is tightly screwed together with the glass
cover is firmly placed on the glass
may be filled with max. 1.5 l.
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
cked, switch off the appliance immediately and pull
the blocking ingredients only afterwards
Do not at all operate this unit with an external timer or a separate
load operation and do not handle it
Be careful when processing liquids. Liquids may spout
tion. There is the hazard of burns with
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
Prior to switching the appliance on make sure that
correctly. This applies especially for the
blade unit is screwed together with the
blade unit is tightly screwed together with the glass
may be filled with max. 1.5 l.
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
cked, switch off the appliance immediately and pull
the blocking ingredients only afterwards
Do not at all operate this unit with an external timer or a separate
load operation and do not handle it
Be careful when processing liquids. Liquids may spout
tion. There is the hazard of burns with
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
correctly. This applies especially for the
blade unit is screwed together with the
blade unit is tightly screwed together with the glass
may be filled with max. 1.5 l.
When processing hot (max. 60 °C) and foaming liquids, the glass
cked, switch off the appliance immediately and pull
the blocking ingredients only afterwards
Do not at all operate this unit with an external timer or a separate
Be careful when processing liquids. Liquids may spout
tion. There is the hazard of burns with
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
correctly. This applies especially for the
blade unit is screwed together with the
may be filled with max. 1.5 l.
cked, switch off the appliance immediately and pull
Do not at all operate this unit with an external timer or a separate
Be careful when processing liquids. Liquids may spout
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
blade unit is screwed together with the
cked, switch off the appliance immediately and pull
To Next Page
Loading...
