Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
gasket are fitted well and the blade wa
electronic system recognizes an operating error.
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
The appliance must be switched
ting/stopping the appliance
Before plugging the appliance in, make sure that the
Connect the appliance to the mains, now the unit is in the standby
pilot lamp behind the decorative ring.
Now turn the rotary knob to ON
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
glass jar before it has stopped!
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
gasket are fitted well and the blade wa
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
electronic system recognizes an operating error.
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
The appliance must be switched
with attached measuring cup
ting/stopping the appliance
Before plugging the appliance in, make sure that the
Connect the appliance to the mains, now the unit is in the standby
pilot lamp behind the decorative ring.
Now turn the rotary knob to ON
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
glass jar before it has stopped!
neither stir in the glass jar with a spoon or other
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
gasket are fitted well and the blade wa
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
electronic system recognizes an operating error.
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
The appliance must be switched
bserve the max. filling quantity
with attached measuring cup
ting/stopping the appliance
Before plugging the appliance in, make sure that the
Connect the appliance to the mains, now the unit is in the standby
pilot lamp behind the decorative ring.
Now turn the rotary knob to ON
position and the unit is in
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
therefore, do not remove the top cover from the
glass jar before it has stopped!
neither stir in the glass jar with a spoon or other
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
gasket are fitted well and the blade wa
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
electronic system recognizes an operating error.
Another operating error is recognized if the
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
nd turn the rotary knob to OFF
bserve the max. filling quantity
with attached measuring cup
Before plugging the appliance in, make sure that the
Connect the appliance to the mains, now the unit is in the standby
pilot lamp behind the decorative ring.
position and the unit is in
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
therefore, do not remove the top cover from the
glass jar before it has stopped!
neither stir in the glass jar with a spoon or other
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
Another operating error is recognized if the
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
nd turn the rotary knob to OFF
otary knob to the left to OFF
bserve the max. filling quantity
Before plugging the appliance in, make sure that the
Connect the appliance to the mains, now the unit is in the standby
position and the unit is in
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
The appliance has a delayed
therefore, do not remove the top cover from the
glass jar before it has stopped!
neither stir in the glass jar with a spoon or other
Mind a secure fitting of the
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
Another operating error is recognized if the
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
nd turn the rotary knob to OFF
otary knob to the left to OFF
press it on firmly. The plastic lip must cover the
Connect the appliance to the mains, now the unit is in the standby
, displayed by a blinking of the 3 LED pilot lamps
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
The appliance has a delayed
therefore, do not remove the top cover from the
neither stir in the glass jar with a spoon or other
Mind a secure fitting of the
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
Another operating error is recognized if the
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
otary knob to the left to OFF
position and disconnect the power
press it on firmly. The plastic lip must cover the
yed by a permanently glowing LED
, displayed by a blinking of the 3 LED pilot lamps
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
The appliance has a delayed
therefore, do not remove the top cover from the
neither stir in the glass jar with a spoon or other
Mind a secure fitting of the
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
Another operating error is recognized if the
jug is lifted at a rotary
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
position and disconnect the power
press it on firmly. The plastic lip must cover the
yed by a permanently glowing LED
, displayed by a blinking of the 3 LED pilot lamps
The appliance is designed for a max. continuous operation time
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
The appliance has a delayed
therefore, do not remove the top cover from the
neither stir in the glass jar with a spoon or other
Mind a secure fitting of the
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
jug is lifted at a rotary
position and disconnect the power
press it on firmly. The plastic lip must cover the
yed by a permanently glowing LED
, displayed by a blinking of the 3 LED pilot lamps
The appliance is designed for a max. continuous operation time
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
position and disconnect the power
press it on firmly. The plastic lip must cover the
yed by a permanently glowing LED
, displayed by a blinking of the 3 LED pilot lamps
To Next Page
Loading...
