Rongta Technology RP310 - Bluetooth Pairing and Printing; Use Bluetooth Interface for Printing

5.4 Bluetooth pairing and printing (only valid for printers with Bluetooth)
The RP310 Bluetooth printer needs to be paired with the main device driving
the printer before working, and the pairing process is initiated by the main device.
The general pairing method is as follows:
(1) Turn on the printer.
(2) The main device searches for external Bluetooth device.
(3) If there are multiple external Bluetooth device, select the printer corresponding
to BDA address (see self-test page for details).
(4) Enter the initial password "0000" or "1234".
(5) Complete the pairing.
Please refer to the Bluetooth function description of the main device for the specific
pairing method.When pairing, the RP310 label printer with Bluetooth interface must be on.
/\ Note: During pairing, please do not turn on multiple printers at
the same time, otherwise you may not be able to judge which
printer was successfully paired.
After successful pairing, other host computers can still be paired with the printer,
and each printer can be paired with up to 8 host computers. If more upper computers
are paired with printers, the host computer paired with the printer at the earliest will be
automatically removed from the pairing list by the printer. At this time, if this host
computer needs to drive the printer for printing, it needs to be paired again.
(For multi-connected Bluetooth only)
5.5 Use Bluetooth interface for printing
(only valid for the printers with Bluetooth)
For host computers with virtual Bluetooth serial ports (such as mobile phones
using SMARTPHONE, POCKET PC, PALM, notebook computer, etc.), after
successful pairing, printing data can be sent to the printer via the virtual Bluetooth
serial port for printing. If the host computer does not have a virtual Bluetooth serial
port, when you want to drive the printer for printing, please consult the supplier of
the host computer.
PRINTER