K.T.S.
Operating Instructions
Single User Mode:
To Open:
Show the User Card to the lock.
1 beep = Lock Open.
To Close:
The latch closes automatically after 2 seconds
(Slam Door Function).
Multi User Mode:
Access by transponder. The transponder code
isxed.
To Open:
Show the User Card to the lock.
1 beep = Lock Open.
To Close:
Show the card to the lock.
1 beep - Lock Closed.
Access by transponder. The transponder code is
erased every time the lock is opened, being available
for a new user.
UserCards:AddaNewUserCard/DeleteExistingUser
Card
Add a New User Card:
Show the lock the Master Tag once and then
show the Blank User Card.
Delete a User Card:
Show the lock the Master Tag once and then
show the User Card you wish to delete.
Master Tag: Open / Reset
To Open:
Show the lock the Master Tag (2 times).
To Close:
The latch closes automatically after 2 seconds
(Slam Door Function).
To Reset:
Show the lock the Master Tag (4 times).
Please note: After using the Reset Mode ALL
User Cards will be erased.