Ronis TRONIC EVOLUTION - TRONIC TOUCH Operating Instructions; Single User Mode; Multi User Mode; Change the User Code

TRONIC TOUCH
Operating Instructions
* * * *
Single User Mode:
To Close:
The latch closes automatically after 2 seconds
(Slam Door Function)
* * * *
Multi User Mode:
To Open:
Enter a 4 digit code. The code is erased every time the
lock is opened.
After 3 error attempts the system locks out and blocks
any access for 30 seconds. The time can be adjusted
via the software.
To Close:
Enter a 4 digit code.
* * * *
Change the Master Code:
* * * * *
Input the current Master Code
and press Enter. Default: 98765
+
+
Change the User Code:
* * * *
+
+
Input the current User Code
and press Enter. Default: 1111
Input the new User Code
and press Enter.
Input the new Master Code
and press Enter.
Open using Master Code / Electronic Master Key:
Inspection Mode:
Input Master Code (Insert Key) and
press Enter. (Remove Key)
Press Enter to close lock within 30
seconds.
The User Code is not deleted (Multi
User Mode).
* * * * *
Delete User Code - Multi User Mode:
Input Master Code (Insert Key) and press
Enter. (Remove Key)
After 30 seconds the lock remains open.
User Code has been deleted and a new User
Code is required.
Settings Key:
Load settings from the computer
to the Settings Key (Black).
+
Connect the Key to the lock.
Settings automatically transferred.
Less than 30 seconds:
Inspection Mode
More than 30 seconds:
User Code Deleted
* * * *
* * * * *
Hold for
3 secs
Hold for
3 secs
To Open:
Enter the 4 digit code. Default: 1111 and press
Enter. The lock is open.