ROOM LIFE SIENNA BENCH - User Manual

SIENNA BENCH
INDOOR USE ONLY · SIMPLE ASSEMBLY REQUIRED
H 46 CM x W 100 CM x L 38 CM | LOAD LIMIT: 125KG
Seat Height: 45 CM
Frame: MDF | Outer: 100% Polyester fabric | Legs: Rubber wood
MADE IN MALAYSIA
WARNING Do not stand on product. Do not use as a step ladder. Do
not use product unless all bolts, screws and knobs are firmly
secured. Only use on even surfaces. Do not use power tools for
assembly. Failure to follow these warnings could result in serious
injury.
CARE Lightly vacuum upholstery with brush attachment. Blot any
spills with a damp cloth. Do not rub. Do not use abrasive materials or
solvents. Wipe legs with a soft cloth. Store in a dry place. Avoid direct
sunlight.

Summary

Sienna Bench Product Details

Important Safety Warnings

Crucial safety guidelines to prevent injury, including prohibitions against standing or using as a ladder.

Care and Maintenance Guide

How to clean upholstery and legs, avoid damage, and store the bench properly for longevity.

Sienna Bench Assembly Guide

Assembly Step 1

Instructions for the initial stage of assembling the Sienna Bench.

Assembly Step 2

Instructions for the second stage of assembling the Sienna Bench.

Assembly Step 3

Instructions for the final stage of assembling the Sienna Bench.

Overview

1. Technical Specifications
2. Assembly Instructions
3. Step 1: Attaching the Legs to the Bench Frame
4. Step 2: Securing the Legs
5. Step 3: Final Assembly
6. Usage Features
7. Maintenance Features
8. Important Warnings

The Sienna Bench is a versatile indoor furniture piece designed for simple assembly and everyday use. It serves as a comfortable seating option or a decorative accent in various living spaces.

Technical Specifications:

• Dimensions: H 46 CM × W 100 CM x L 38 CM
• Load Limit: 125 KG
• Seat Height: 45 CM
• Frame Material: MDF (Medium-Density Fiberboard)
• Outer Fabric: 100% Polyester
• Legs Material: Rubber wood
• Origin: Made in Malaysia

Assembly Instructions:

The bench requires simple assembly. It is recommended to read all instructions carefully before beginning. All wrapping material, staples, and packing straps should be removed from the outer carton. Before assembly, verify that all required components are present using the assembly guide. To protect the product's finish, assembly should be performed on a soft surface.

Step 1: Attaching the Legs to the Bench Frame

• Position the bench frame (A) upside down on a soft, clean surface.
• Take the four legs (B) and align them with the pre-drilled holes at each corner of the bench frame.
• Ensure the legs are oriented correctly, with the angled side facing outwards.
• Secure each leg to the frame using the provided bolts. Do not fully tighten the bolts at this stage.

Step 2: Securing the Legs

• Once all four legs (B) are loosely attached, use the provided JCBC M6 x 60mm bolts (C) and M6 washers (D) to firmly secure the legs to the bench frame.
• Insert the bolts through the washers and into the pre-drilled holes in the legs and frame.
• Use the M4 Allen Key (F) to tighten all bolts securely. It is crucial to ensure all bolts, screws, and knobs are firmly secured before using the product.

Step 3: Final Assembly

• Carefully turn the assembled bench upright.
• Check the stability of the bench by gently rocking it. If there is any wobbling, re-check the tightness of all bolts.
• The bench is now ready for use.

Usage Features:

The Sienna Bench is designed for indoor use only. It provides a comfortable seating solution with a sturdy construction. Its compact size makes it suitable for various rooms, including living rooms, bedrooms, entryways, or hallways. The polyester fabric offers a soft touch, while the rubber wood legs provide stability and a touch of natural elegance.

Maintenance Features:

• Upholstery Care: Lightly vacuum the upholstery using a brush attachment to remove dust and debris. For spills, blot immediately with a damp cloth. Do not rub the spill, as this can spread it or damage the fabric. Avoid using abrasive materials or solvents on the upholstery.
• Legs Care: Wipe the rubber wood legs with a soft cloth to keep them clean and free of dust.
• Storage: Store the bench in a dry place to prevent moisture damage.
• Sunlight Exposure: Avoid direct sunlight exposure, as prolonged exposure can cause the fabric to fade or the wood to warp over time.

Important Warnings:

• Safety First: Do not stand on the product. It is not designed to support standing weight and doing so could lead to injury or damage to the bench.
• Not a Step Ladder: This product should not be used as a step ladder.
• Secure Fasteners: Ensure all bolts, screws, and knobs are firmly secured before using the product. Loose fasteners can compromise stability and lead to accidents.
• Even Surfaces: Always use the bench on even surfaces to prevent tipping or instability.
• No Power Tools: Do not use power tools for assembly. Hand-tightening with the provided M4 Allen Key is sufficient and prevents overtightening, which could strip screws or damage the frame.
• Injury Risk: Failure to follow these warnings could result in serious injury to the user or damage to the product.

ROOM LIFE SIENNA BENCH Specifications

General

Brand	ROOM LIFE
Model	SIENNA BENCH
Category	Indoor Furnishing
Language	English