8
RootsScrub B45 Series
For easy transportation of machine, it is recommended to lift
up the brush head and squeegee as represented, prior to
transportation of the machine .
Transport
l The operator must always use safety gloves, safety
helmet, shoes while operating/maintaining the machine.
l On inclined/tilted surfaces, the tilt angle and the driving
direction should not exceed the values given in this
manual.
l Do not place any tools or metallic objects on top the
battery. Risk of short circuit and deflagration!
l Smoking or naked flames are strictly prohibited.
l Always allow the machine sufficient time to cool before
carrying out any repair or maintenance work.
l Ensure that there is adequate ventilation for diverting the
exhaust gases/dust when operating the machine in a
closed area.
l Do not place hand or any object while the brushes are
running.
l Suitable tools must be used for cleaning and maintenance
work.
l Do not carry out any welding, drilling, sawing or grinding
work on the frame sections. Damaged parts may only be
changed at an authorized service center.
l It is not permitted to use aggressive and corrosive
cleaning agents.
l Used batteries with the recycling symbol must not be
disposed of in household waste.
l Maintenance work may be carried out by authorised
dealer only.
l Always use appropriate tool and equipments while
working on the machine.
l The cable must not chafe against anything. In the case of
defective insulation, do not use the on-board charger.
l Do not use harsh chemicals to clean the machine.
This machine is not suitable for evacuation of dusts,
which are explosive or dangerous to health.
Do not clean the machine by means of vapour jet
or high pressure cleaning equipment.
l Before operating the machine kindly use these safety
devices:
a) Shoes
b) Gloves
û Do not smoke near machine.
û Do not expose machine to naked flames or
burning debris.
X
l This machine is not intended for use on public roads and
places. Only qualified personnel must perform
maintenance and repair work.
l Turn the machine off before cleaning and maintaining the
machine, when replacing parts or when changing over to
another function.
GENERAL SAFETY INSTRUCTIONS - WALK BEHIND SCRUBBER DRIERS
To Next Page
Loading...
