ROOTS RootsScrub E Series - Maintenance Chart

18
RootsScrub E Series (230V/50Hz)
MAINTENANCE
MAINTENANCE CHART
The below table indicates the Person Responsible for each procedure:
O = Operator
T = Trained Personnel
Interval
Person
Resp.
Description Procedure
O Pad(s) Check, flip or replace
O Brush Check, clean
O Dirty water tank Drain, rinse, clean float, float-holder filter
O Squeegee Clean, check for damage and wear
O Brush head skirt Check for damage and wear
O Fresh water fill port filter Check for debris, clean
O Flow divertor Check for debris, clean
O Squeegee assembly Check, clean
O Dirty water tank seal Check for wear
O Squeegee lips Check for deflection
O Squeegee lips Check for wear, turn or replace
O Power cord Check for damage
O Hoses Check for damage and wear
O Squeegee lips Check for wear, turn or replace
O Brush Check for tight fit
O Dirty water tank seal Check for wear
O Nozzle Check nozzle for block, clean if required
T
Squeegee Check squeegee holder and castor roller, re-adjust if required
O
Brush head skirt
Check for damage and wear
O
Hoses Check for damage and wear
O
Squeegee lips Check for wear, turn or replace
T
Suction turbine Check carbon brushes, replace if required
Daily
Weekly
100 Hours
200 Hours
50 Hours