ROOTS RootsScrub E4550 ES - Cleaning the Brush Head; Water Manifold

29
RootsScrub E4550 ES
MAINTENANCE
Cleaning the Brush Head
= Move the machine away from the escalator.
= Remove the brushes.
= Place the spill tray under the brush head.
= Attach the floor cleaner accessory to the machine.
= Switch On the machine.
= Direct water spray under the brush shield area to throughly
clean away the dirt.
= Empty the spill tray into the drain and clean.
CAUTION
DO NOT clean the brush head with a high pressure washer.
DO NOT empty the spill tray into the environment.
Floor cleaner
Spill tray
Water Manifold
= Visually check the water manifold and hoses for any leak.
WARNING
WARNING: DO NOT TAMPER WITH THE SOLENOIDS OR THE
PUMP.