14 Rose Point Navigation Systems
Gateway Configuration
Rose Point ECS or Coastal Explorer
Note: You must install the latest release of Rose Point ECS™ or Coastal
Explorer™ to ensure proper communication with the Nemo Gateway.
Coastal Explorer 2011 / Rose Point ECS 2011:
In Rose Point ECS or Coastal Explorer use Main Menu > Configure Vessel and
Electronics > Electronics. Then select the appropriate device in the list and
click Gateway Settings
Coastal Explorer 4.0 / Rose Point ECS 4.0:
In Rose Point ECS or Coastal Explorer use Settings > Electronics > Rose Point
Nemo Gateway > Gateway Settings
The system’s default web browser will open and present the Configuration
Interface.
See “Configuration Interface” for additional information. For a more detailed
explanation of Nemo Configuration, please see our Nemo Gateway support
page on www.rosepoint.com.www.rosepoint.com.
Companion App
The companion app “Nemo Gateway” may be installed on iOS and Android
devices through their respective app stores.
Accessing Configuration Interface
Connect the mobile device to the WiFi network that the Nemo Gateway is
connected to.
Launch the companion app and wait for your Nemo Gateway to be discovered.
Once discovered; click or tap on Nemo Gateway listing.
This will launch the Configuration Interface.
To Next Page
Loading...