Rosemount Analytical SOLU COMP II - Page 44

36
MODEL SOLU COMP II SECTION 5.0
PROGRAMMING THE ANALYZER
5.11.2 Procedure: Changing Screen Contrast
1. Press MENU. The main menu screen appears. Choose Display.
2. Choose Contrst.
3. Press " or ' to increase or decrease the screen contrast. As contrast
increases, the number increases.
4. The display returns to the screen shown in step 2. To return to the main
menu, press MENU. To return to the main display, press MENU followed
by EXIT.
Calibrate Hold
Program
DDiissppllaayy
Default Display
Units
CCoonnttrrsstt
Screen Contrast:
5500
5.11.2 Procedure: Selecting a Display Screen
1. Press MENU. The main menu screen appears. Choose Display.
2. Choose Default Display.
3. Press " or ' until the desired display appears. Press ENTER. For an
explanation of abbreviations, see Section 5.11.1.
4. The display returns to the screen in step 2. To return to the main menu,
press MENU.To return to the main display, press MENU followed by EXIT.
Calibrate Hold
Program
DDiissppllaayy
DDeeffaauulltt DDiissppllaayy
Language Contrst
5.11.3 Procedure: Choosing a Language
1. Press MENU. The main menu screen appears. Choose Display.
2. Choose Language.
3. Choose English, Français, Español, Deutsch, Italiano, or Portugues.
4. The display returns to the screen in step 2. To return to the main menu,
press MENU.To return to the main display, press MENU followed by EXIT.
Calibrate Hold
Program
DDiissppllaayy
Default Display
LLaanngguuaaggee
Contrast
EEnngglliisshh
Français
Español >>
To choose a menu item, move the cursor to the item and press ENTER.
To store a number or setting, press ENTER.