Need help?Do you have a question about the Rosemount TankRadar Rex FCU 2160 and is the answer not in the manual?
General| Model | FCU 2160 |
|---|---|
| Category | Measuring Instruments |
| Manufacturer | Rosemount |
| Product Name | TankRadar Rex |
| Power Supply | 24 VDC |
| Ingress Protection | IP66/67 |
| Housing Material | Aluminum |
| Communication Protocol | HART, Foundation Fieldbus |
| Operating Temperature | -40 to 80 °C |
| Measurement Principle | FMCW Radar |
| Accuracy | ±1 mm (0.04 in) or ±0.05% of measured distance, whichever is greater |
| Process Temperature | -40 to 200 °C |
| Process Pressure | 0 to 40 bar |
| Application | Continuous level measurement in tanks |
Describes the Radar Tank Gauge (RTG) as a core system component.
Explains the principles of intrinsic safety for hazardous areas.
Details the use and characteristics of explosion proof enclosures.
Overview of the Rex RTG, including antenna types and measurement principle.
Details the FCU's role in communication and data concentration.
Covers procedures for initiating echo search and managing device databases.
Describes how to manually adjust the calibration distance to compensate for differences.
Explains using the WinSetup function to optimize measurement performance.
Lists causes and actions for RTG communication failures.
Addresses issues with temperature sensor connections and configuration.
Covers causes and solutions for inaccurate level readings.
To Next Page