Need help?Do you have a question about the Rosemount TankRadar Rex RDU 40 and is the answer not in the manual?
General| Frequency | 10 GHz |
|---|---|
| Process Pressure | -1 to 40 bar (-14.5 to 580 psi) |
| Power Supply | 24 V DC |
| Ingress Protection | IP66/67 |
| Protection Rating | NEMA 4X |
| Approvals | ATEX, IECEx, FM, CSA |
| Type | Radar Level Gauge |
| Application | Liquid level measurement in tanks |
| Technology | FMCW Radar |
| Measuring Range | Up to 40 meters |
| Accuracy | +/- 3 mm |
| Beam Angle | 10° |
| Process Temperature | -40 to +200 °C |
| Output | 4-20 mA HART |
| Communication Protocols | HART |
| Housing Material | Aluminum |
Principle of restricting electrical energy in hazardous-area circuits to prevent ignition.
Enclosures designed to withstand internal explosions safely without spreading flame.
Procedures for loading databases, installing software, and exchanging electronics.
Default database loading, bus ports, power, and redundancy setup.
Explains the need for calibration and adjustment of Calibration Distance.
Details how to manually adjust the Calibration Distance parameter.
Describes using the WinSetup Calibrate function for automatic adjustment.
Provides instructions for performing manual ullage measurements (hand dips).
Guides on entering hand dipped and measured levels for calibration.
Lists symptoms, causes, and actions for RTG communication failures.
Addresses issues with incorrect temperature readings and their causes.
Details causes and solutions for incorrect level readings.
Troubleshoots program download issues and communication failures (ComFail).
Lists DAU display error codes, their causes, and recommended actions.
To Next Page