Need help?Do you have a question about the Rosemount TankRadar Rex FBM 2180 and is the answer not in the manual?
General| Power Supply | 24 V DC |
|---|---|
| Ingress Protection | IP66/67 |
| Enclosure Rating | NEMA 4X |
| Antenna Type | Parabolic antenna |
| Approvals | ATEX, IECEx, FM, CSA |
| Type | Radar level transmitter |
| Measurement Principle | FMCW radar |
| Process Temperature | 200 °C |
| Ambient Temperature Range | -40 to 80 °C |
| Process Pressure | Up to 40 bar |
| Output Signal | 4-20 mA HART |
| Communication Protocol | HART, Foundation Fieldbus, PROFIBUS PA |
| Housing Material | Aluminum |
| Process Connection | Flange |
Explains the TankRadar Rex System for tank level gauging and its components.
Details RTG types, measurement principles, transmitter electronics, and calculations.
Describes FCU, DAU, and RDU 40 units and their functions.
Covers intrinsic safety and explosion-proof requirements for hazardous areas.
Covers echo search, database management, software installation, and hardware exchange.
Details transmitter head electronics, temp measurement, analog I/O, HART, and relay outputs.
Guides on FCU/DAU/FBM/RDU service, calibration, and troubleshooting.
Provides guidance for diagnosing and resolving common system issues.
Lists replacement parts for Radar Tank Gauge, DAU, FCU, and FBM.
Provides a list of mechanical and electrical installation drawings.
Details specifications for RTG, FCU, DAU, RDU, and FBM models.
To Next Page