Need help?Do you have a question about the Rosemount TankRadar Rex RTG 3930 and is the answer not in the manual?
General| Type | Radar Level Transmitter |
|---|---|
| Measurement Principle | Non-contact radar |
| Technology | FMCW (Frequency Modulated Continuous Wave) |
| Accuracy | ± 1 mm |
| Output Signal | 4-20 mA HART |
| Communication Protocols | HART |
| Enclosure Rating | IP66/IP67 |
| Housing Material | Aluminum |
| Antenna Type | Horn |
| Approvals | ATEX, IECEx, FM, CSA |
Overview of the TankRadar Rex System for tank level gauging and inventory control.
Principle of restricting electrical energy in hazardous-area circuits to prevent ignition.
Using explosion-proof enclosures to contain an explosion safely.
Detailed overview of the Rex RTG, its parts, antenna types, and measurement principle.
Using the Calibrate function to optimize measurement performance and adjust RTG.
Steps for entering hand-dipped and measured levels for calibration.
Troubleshooting steps for 'No contact with RTG' and communication errors.
Troubleshooting for DAU contact, incorrect readings, and display error codes.
To Next Page