Need help?Do you have a question about the Rosemount 3051S and is the answer not in the manual?
General| Type | Pressure Transmitter |
|---|---|
| Accuracy | ±0.025% of span |
| Output | 4-20 mA with HART, FOUNDATION Fieldbus, PROFIBUS PA |
| Process Connection | 1/4 NPT, 1/2 NPT |
| Temperature Range | -40 to 85°C (-40 to 185°F) |
| Material | 316L stainless steel, Hastelloy C-276 |
| Enclosure Rating | NEMA 4X, IP66 |
| Measurement Type | Absolute, Gauge, Differential Pressure, Level |
| Diagnostics | Advanced diagnostics |
| Certifications/Approvals | ATEX, IECEx, FM, CSA |
| Power Supply | 10.5 to 42 VDC |
| Response Time | 100 ms |
Provides critical safety precautions to be followed before performing any configuration operations.
Guides the user through setting up flow configuration using the Engineering Assistant software.
Covers the essential procedures for commissioning the Rosemount 3051SMV, including basic setup.
Explains how to configure detailed device parameters like identification, alarms, mapping, and communication.
Details how to configure specific process variables such as flow rate, energy rate, totalizer, and pressure.
Highlights essential safety precautions required during the installation process.
Outlines the step-by-step procedures for installing the transmitter, including security and alarm configuration.
Provides critical safety warnings relevant to operation and maintenance tasks.
Details the tasks involved in configuring output parameters and calibrating sensors and analog output.
Explains how to perform functional tests for flow/energy calculations and analog output loop tests.
Provides corrective actions for common communication issues between Engineering Assistant and the transmitter.
Addresses unexpected process variable readings and their potential causes and solutions.
Explains how to interpret HART host and LCD display diagnostic alerts for troubleshooting.
Details how to interpret measurement quality and limit statuses for diagnosing issues.
Details configuration steps for the transmitter when used in SIS applications, including damping and alarms.
Lists performance specifications including reference accuracy, DP ranges, and temperature interface accuracy.
To Next Page