Specifications and Reference Data
September 2017
Reference Manual
00809-0100-4803, Rev GA
Specifications and Reference Data
144
A.3.2 Rosemount 300SMV housing kit
Table A-7. Ordering Information
Rosemount
model
300SMV Housing kit for Rosemount 3051SMV
Multivariable type
M Multivariable measurement with fully compensated mass and energy flow ★
P Multivariable measurement with direct process variable output ★
Temperature input
N None ★
R
(1)
RTD input (type Pt 100, –328 to 1562 °F [–200 to 850 °C]) ★
Transmitter output
A 4–20 mA with digital signal based on HART Protocol ★
Housing style
Material
(2)
Conduit entry
1A Plantweb housing Aluminum
1
/2–14 NPT ★
1B Plantweb housing Aluminum M20 ⫻ 1.5 (CM20) ★
1J Plantweb housing SST
1
/2–14 NPT ★
1K Plantweb housing SST M20 ⫻ 1.5 (CM20) ★
1C Plantweb housing Aluminum G
1
/2
1L Plantweb housing SST G
1
/2
Options (include with selected model number)
RTD cable (RTD sensor must be ordered separately)
C12 RTD input with 12 ft. (3,66 m) of shielded cable ★
C13 RTD input with 24 ft. (7,32 m) of shielded cable ★
C14 RTD input with 75 ft. (22,86 m) of shielded cable ★
C20
(3)
RTD input with 27-in. (69 cm) of armored shielded cable ★
C21 RTD input with 4 ft. (1,22 m) of armored shielded cable ★
C22 RTD input with 12 ft. (3,66 m) of armored shielded cable ★
C23 RTD input with 24 ft. (7,32 m) of armored shielded cable ★
C24 RTD input with 75 ft. (22,86 m) of armored shielded cable ★
C30
(3)
RTD input with 25-in. (64 cm) of ATEX/IECEx Flameproof cable ★
C32 RTD input with 12 ft. (3,66 m) of ATEX/IECEx Flameproof cable ★
C33 RTD input with 24 ft. (7,32 m) of ATEX/IECEx Flameproof cable ★
C34 RTD input with 75 ft. (22,86 m) of ATEX/IECEx Flameproof cable ★
C40
(3)
RTD input with 34-in. (86,36 cm) shielded cable and 24-in. (60,96 cm) FM Approved coupling flex ★
C41
(3)
RTD input with 40-in. (101,60 cm) shielded cable and 30-in. (76,20 cm) FM Approved coupling flex ★
To Next Page
Loading...
