CASE 6A series
User Manual
7
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
4.1
Locate the screw holes on both
sides of 5.25"device such as
CD-ROM and screw the rails
onto the 5.25" device
4.2
Insert the railed device into the
5.25" drive bay
4.Installing 5.25" Device
PS:
• Recommend to remove the 5.25" metal cover below the bay you
want to install your 5.25" device for easier installation
• When you feel difficult to pull out your railed 5.25" device, push it
down a little will help you
To Next Page
Loading...
