Rosewill CULLINAN V Series - Install 3.5 HDD; Install 2.5 SSD

5
5. Install 3.5” HDD
5-1. Take out the 3.5” HDD tray from the cage.
5-2. Install the 3.5” drive onto the tool-less tray and secure with Screw-B if so desired (Figure 5a).
A 2.5” SSD can also be installed on the tray with Screw-C (Figure 5b).
5a 5b
5-3. Insert the 3.5” drive tray back into the HDD cage (Figure 5c).
5c
6. Install 2.5” SSD
6-1. Unscrew to remove the 2.5” SSD trays from the chassis.
6-2. Secure the 2.5” drive onto the tray with Screw-B (Figure 6a).
6a