Need help?Do you have a question about the Rosewill Power Supply and is the answer not in the manual?
General| Input Voltage | 100 - 240 V |
|---|---|
| Category | Power Supplies |
| Type | ATX |
| Maximum Power | Varies by model (500W, 600W, 700W, 850W, 1000W) |
| Efficiency | Varies by specific model (e.g., 80 Plus Bronze, 80 Plus Gold) |
| Modular | Varies by specific model (Full, Semi, Non-modular) |
| Fan Size | 140mm or 120mm (Varies by model) |
| Input Frequency | 50/60 Hz |
| Protection | OCP, OVP, SCP, OPP, UVP |
| Connectors | Varies by specific model (e.g., 24-pin ATX, 8-pin EPS, PCIe, SATA) |
Highlights ATX V2.2 standard with dual 12V rails for enhanced power delivery.
Features an oversized 135mm fan for optimal cooling performance.
Details the versatile 20+4 pin main connector for motherboard compatibility.
Covers the 4-pin and 8-pin EPS +12V connectors for CPU power.
Mentions dual PCI-Express connectors for SLI graphics card setups.
Notes the inclusion of four SATA connectors for storage devices.
Describes the aesthetic appeal of the mirror titanium finish.
Points out the black mesh sleeving on all cables for tidiness.
Specifications for the 20+4 pin main connector, quantity one.
Specifications for the 4+4 pin connector, quantity one.
Specifications for the 6 pin PCI-Express connectors, quantity two.
Specifications for the 4 pin peripheral connectors, quantity eight.
Specifications for the 5 pin SATA connectors, quantity four.
Specifications for the 4 pin floppy connectors, quantity two.
Details AC input voltage (115V/230V), frequency (50/60Hz), and current.
Lists output voltages, max currents, max watts, regulation, and noise.
Covers total output power, efficiency, hold-up time, and stability.
Explains the over power protection range from 110% to 150% of rated output.
Lists the minimum and maximum voltage thresholds for over voltage protection.
Confirms short circuit protection for +3.3V, +5V, and +12V outputs.
Details operating and storage temperature and humidity ranges.
Lists recognized safety standards like TUV/CE/CB/FCC/UL.
States compliance with FCC class B and FTZ standards.
Outlines HI-POT testing parameters for input to ground and output.
Specifies minimum insulation resistance values for input to ground and output.
Provides the Mean Time Between Failures (MTBF) rating of 100,000 hours.
Instructions on affixing the power supply to the PC case using screws.
Guide to attaching the 20-pin or 24-pin main connector to the motherboard.
Instructions for connecting the 4+4 pin EPS +12V connector to the motherboard.
Details on connecting the 6-pin PCI-Express connector for video cards.
Explains the use of the 4-pin Molex connector for HDDs and optical drives.
Describes the application of 4-pin floppy connectors for floppy drives or Zip drives.
Details the use of 5-pin SATA connectors for SATA HDDs and optical drives.
Steps for preparing the system, including voltage setting and power connection.
Information on registering the product at www.rosewill.com for warranty and support.
Provides website, support phone number (800-575-9885), and email (techsupport@rosewill.com).
To Next Page
