4
© All rights reserved by Rosewill
1.
2.
User ManualRISE
CASE
Unscrew to remove left and right panels.
Place the power supply from the left side into
the chassis and secure with screws.
NOTICE :
-If your power supply is equipped with single
fan (120mm, 135mm or 140mm), please have
the fan face to the bottom.
-Please remember to clean the PSU dust
filter regularly or insufficient air intake may
fail your power supply permanently.
**Unscrew to remove the cover to install the
secondary PSU if necessary.
To Next Page
Loading...
