Need help?Do you have a question about the Rosewill RNX-AC1200PCE and is the answer not in the manual?
General| Category | Adapter |
|---|---|
| Model | RNX-AC1200PCE |
| Wireless Standards | IEEE 802.11ac, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Frequency Band | 2.4GHz / 5GHz |
| Maximum Data Rate | 1200Mbps |
| Antenna Gain | 5dBi |
| Type | Wireless PCI Express Adapter |
| Wireless Data Rates | 802.11n: up to 300Mbps |
| Interface | PCI Express |
| Security | WEP, WPA, WPA2 |
| Operating System Support | Windows 10, Windows 8, Windows 7 |
| Antenna | 2 x detachable antennas |
Power off PC, open case, insert adapter into PCI-E slot, and close lid.
Fasten antennas to stand or connect directly to the adapter.
Power on PC, insert CD, close wizard if prompted, and start driver installation.
Select Driver Installation, start setup, restart PC, and locate network.
Select Driver Installation, proceed with software setup, restart PC, and locate network.
Explains General, Profile, Available Network, WPS, Radio Off, and Disable Adapter functions.
Details Activity LED blinking during data transfer and antenna connection best practices.
To Next Page
