Rosewill N150 User Manual

Hardware Connection
1
For Windows Vista
For Windows XP
You may see the Found New Hardware Wizard after the
adapter has been inserted. Please click Cancel.
1
Insert the Rosewill Resource CD into the CD-ROM
drive.
Browse the Resource CD and click
Setup .
2
Select Install Rosewill Wireless Configuration
Utility and Driver
, and then click Next.
4
5
Click Change... to specify the destination location
or you can leave it default. Click Next to continue.
6
Click Install to install the driver and utility
for your adapter.
Software Installation
2
(The installation procedures in Windows XP/ Vista/ 7/ 8 are similar. Here we use the procedures in Windows 7 as an example.)
The following screen will then appear.
Click Finish to complete the setup.
8
7
The installation process may take 1-2 minutes. The InstallShield Wizard window will appear.
Click Next to continue.
3
Package Contents
System Requirement
Resource CD QIG
· Windows XP · Windows Vista · Windows 7 · Windows 8
MODEL NO. RNX-N150NUB
Quick Installation Guide
N150 Wireless Nano USB Adapter
RNX-N150NUB
MODEL NO. RNX-N150NUB
Quick Installation Guide
N150 Wireless Nano USB Adapter
7109504765 REV 1.0.0

Rosewill N150 Specifications

General

Brand	Rosewill
Model	N150
Category	Adapter
Language	English

Summary

Package Contents

Hardware Connection

Found New Hardware Wizard Prompt

Wizard prompt appears after inserting adapter. Click Cancel to proceed with installation.

Software Installation

Insert Resource CD

Insert the Rosewill Resource CD into the CD-ROM drive for software installation.

Browse and Run Setup

Navigate the CD and click 'Setup' to launch the installation wizard.

Start InstallShield Wizard

The InstallShield Wizard appears; click 'Next' to continue the installation process.

Select Installation Type

Choose to install the Rosewill Wireless Configuration Utility and Driver.

Choose Destination Location

Select the installation folder or accept the default location.

Initiate Installation

Click 'Install' to begin installing the driver and utility software.

Installation Progress

The installation process will take approximately 1-2 minutes.

Complete Setup

Click 'Finish' to successfully complete the software installation.

Connect to Network

Access Network List

Click 'Network' to view available wireless networks and select your target.

Connect to Target Network

Highlight the network name and click 'Connect' to establish a wireless connection.

Enter Security Key

Input the wireless password (Security Key) for secured WPA/WPA2-PSK networks.

Confirm Network Connection

Confirmation screen indicates successful connection; click 'Close' to access the internet.

Connect via WPS

Initiate WPS Connection

Press the WPS/RESET button on your router to start the WPS pairing process.

Launch Utility WPS Function

Open the utility and select the WPS option to initiate connection from the device.

Complete WPS Connection

Wait for the connection to complete and confirm the successful WPS connection.