Controller Operation
AYC-F/Gx4 Series Installation and Programming Manual 53
5.9.12 Deleting Primary and Secondary Codes
There are two methods to delete Primary and Secondary codes: the
Standard Method and the Code Search Method.
When deleting a user slot, both the Primary code and the Secondary
code are erased.
It is recommended that a record be kept of added and deleted
users so that it is easier to keep track of which user slots are
empty and which user slots are not.
5.9.12.1 Deleting Primary and Secondary Codes using Standard
Method
To delete the Primary and Secondary codes using the Standard
Method:
1. Enter Programming mode.
2. Press 8 to enter Menu 8.
The left LED turns red and the right LED turns
orange.
3. Enter the 3-digit User Slot code you wish to
delete.
The left LED flashes red indicating the
controller is waiting for the Programming
code to confirm the deletion.
If the user slot
is empty, you hear a long beep
and the unit returns to Normal mode.
Orange
Orange
To Next Page
Loading...
Need help?
General
