Rosslare D-805 Series - User Manual

Introduction
The RSDP-805 series expansion boards can be installed directly on top of the AC-825IP or installed on the wall and
fitted on a DIN rail as an expansion board with RS-485 communication to the AC-825IP OSDP/RSDP-Bus (serial bus).
When an RSDP-805 expansion board is used with Rosslare’s AxTraxPro™ Access Control Management Software, the
expansion board supports SIA Open Supervised Device Protocol (OSDP V2) including OSDP-SC (secure channel).
The available RSDP-805 models are:
•
R-805 Series: 16-Output Expansion Board
•
S-805 Series: 16-Input Expansion Board
•
D-805 Series: 4-Door Expansion Board
•
P-805 Series: 16-Input, 8-Output Expansion Board
www.rosslaresecurity.com
1
RSDP-805 Series
Expansion Boards for
AC-825IP
Installation Guide

Rosslare D-805 Series Specifications

General

Brand	Rosslare
Model	D-805 Series
Category	Computer Hardware
Language	English

Summary

R-805 Series Technical Specifications

R-805 Series Wiring and Operation

Operating the R-805

Procedure for setting the R-805 to installation mode via DIP switches.

S-805 Series Technical Specifications

S-805 Series Wiring and Operation

Operating the S-805

Procedure for setting the S-805 to installation mode via DIP switches.

D-805 Series Technical Specifications

D-805 Series Wiring and Operation

Operating the D-805

Procedure for setting the D-805 to installation mode via DIP switches.

P-805 Series Technical Specifications

P-805 Series Wiring and Operation

Wiring Instructions

Steps for connecting RS-485 and inputs/outputs of the P-805.

Operating the P-805

Procedure for setting the P-805 to installation mode via DIP switches.