Need help?Do you have a question about the Roswell RMA 800.5 and is the answer not in the manual?
Important warnings regarding installation suitability, structural integrity, and noise interference.
Recommendations for secure mounting, dry locations, and optimal airflow for heat dissipation.
Guidance on ensuring adequate power from the boat's electrical system for amplifier operation.
Instructions for proper ground wire connection and routing signal cables away from power wires.
Explanation of the level control for matching head unit output and avoiding noise.
Details on the amplifier's protection system and how to access the control panel.
Introduction to crossover functionality for filtering unwanted frequencies.
Explanation of the HPF to pass high frequencies and reduce lower ones.
Explanation of the LPF to pass low frequencies and reduce higher ones.
Description of BP filter using HPF and LPF to play a selected frequency range.
Details on subsonic filter settings and the full range frequency pass-through.
Explanation of the 'Double' setting for the 600.4 amplifier.
Information on the adjustable bass boost feature and its effect on power output.
Description of the remote gain control module for easy gain adjustment.
Explanation of RCA line out connections for linking multiple amplifiers.
Instructions for connecting speakers to the block style terminals.
Recommended fuse ratings for specific RMA amplifier models (600.1, 500.2, 600.4, 800.5).
Diagram showing power and ground connections for the RMA 600.1 amplifier.
Diagrams illustrating subwoofer connections for the RMA 600.1.
Overview of the control panel features for the RMA 500.2 amplifier.
Diagram showing power, ground, and remote connections for the RMA 500.2.
Diagram showing how to connect two speakers to the RMA 500.2.
Diagram for connecting a subwoofer in bridged mode with the RMA 500.2.
Summary of control panel settings for the RMA 500.2.
Diagram showing power and ground connections for the RMA 600.4 amplifier.
Diagrams illustrating 4-channel and 3-channel speaker connections.
Explanation of the 'double' setting for 2-channel operation with the RMA 600.4.
Wiring diagrams for 4-channel speaker outputs on the RMA 600.4.
Wiring diagrams for 2-channel speaker outputs on the RMA 600.4.
Overview of control panel settings for the RMA 600.4 amplifier.
Diagram illustrating power, ground, and remote connections for the RMA 800.5.
Diagram for using the RMA 800.5 in 5-channel mode with source unit RCAs.
Diagram showing 5-channel speaker connections for the RMA 800.5.
Diagram illustrating RCA input connections for the RMA 800.5.
Wiring diagram for 3-channel bridged output on the RMA 800.5.
Wiring diagram for 4-channel mode on the RMA 800.5.
Diagrams for 4-channel speaker outputs on the RMA 800.5.
Wiring diagram for 2-channel mode on the RMA 800.5.
Diagrams for 2-channel speaker outputs on the RMA 800.5.
Wiring diagram for 2-channel bridged output on the RMA 800.5.
Overview of control panel settings relevant to 2CH bridged mode.
Cautionary note on amplifiers becoming hot during operation and the need for cooling.
Recommendations for vertical or flat mounting to ensure proper cooling and airflow.
Warning to keep items like life vests and towels away from the amplifier.
Advisory on continuous exposure to high sound pressure levels and hearing loss.
To Next Page
General