Rotel C8 - Specifications; C8 Power Specifications; C8+ Power Specifications

14
C8 / C8+ Eight Channel Power Ampliers
C8+C8+
Max Power outputMax Power output 150 watts / channel
(8 channels driven, 4 ohms)
Continuous Power OutputContinuous Power Output 100 watts / channel
(8 channels driven, 8 ohms)
Bridged Power OutputBridged Power Output 300 watts / channel
(4 channels driven, 4 ohms)
Total Harmonic Distortion Total Harmonic Distortion < 0.1%
Intermodulation Distortion Intermodulation Distortion < 0.1%
(60 Hz : 7k Hz, 4:1)
Frequency Response Frequency Response
Line level Input 10 Hz - 100k Hz, +/- 0.5 dB
Tone ControlTone Control
Bass ±10dB at 100Hz
Treble ±10dB at 10kHz
Damping FactorDamping Factor (20 Hz – 20k Hz, 8 ohms) 80
Input Sensitivity / Impedance Input Sensitivity / Impedance
Line level Input (RCA) 0.43 V / 31k ohms
Input OverloadInput Overload
Line level Input (RCA) 2.8 V
Signal to Noise Ratio Signal to Noise Ratio (A weighting)
Line level Input (RCA) 100 dB
Crosstalk / Separation Crosstalk / Separation > 50 dB
DigitalDigital
Frequency Response Frequency Response 10 Hz - 20k Hz, +/- 0.5 dB
Signal to Noise Ratio Signal to Noise Ratio (A weighting) 102 dB
Input Sensitivity / Impedance Input Sensitivity / Impedance 0 dBFS / 75 ohms
Digital InputsDigital Inputs SPDIF LPCM (up to 192kHz 24bit)
GeneralGeneral
Power Requirements:Power Requirements:
USA: 120 Volts, 60 Hz
EC: 230 Volts, 50 Hz
Power Consumption Power Consumption 980 watts
Standby Power ConsumptionStandby Power Consumption
Normal < 0.5 watts
Network Wakeup < 2 watts
BTU BTU (4 ohms, 1/8th power) 2744 BTU/h
Dimensions Dimensions (W x H x D) 430 x 97 x 414 mm
(17 x 3
7
/
8
x 16
2
/
7
ins)
Front Panel HeightFront Panel Height 2U (88.1 mm, 3
1
/
2
ins)
Weight Weight (net) 18.35 kg, 40.79 lbs.
Specications
C8C8
Max Power outputMax Power output 70 watts / channel
(8 channels driven, 4 ohms)
Continuous Power OutputContinuous Power Output 50 watts / channel
(8 channels driven, 8 ohms)
Bridged Power Output Bridged Power Output  140 watts / channel
(4 channels driven, 4 ohms)
Total Harmonic Distortion Total Harmonic Distortion < 0.1%
Intermodulation Distortion Intermodulation Distortion < 0.1%
(60 Hz : 7k Hz, 4:1)
Frequency Response Frequency Response
Line level Input 10 Hz - 100k Hz, +/- 0.5 dB
Tone ControlTone Control
Bass ±10dB at 100Hz
Treble ±10dB at 10kHz
Damping FactorDamping Factor (20 Hz – 20k Hz, 8 ohms) 80
Input Sensitivity / Impedance Input Sensitivity / Impedance
Line level Input (RCA) 0.3 V / 31k ohms
Input OverloadInput Overload
Line level Input (RCA) 2.8 V
Signal to Noise Ratio Signal to Noise Ratio (A weighting)
Line level Input (RCA) 100 dB
Crosstalk / Separation Crosstalk / Separation > 50 dB
GeneralGeneral
Power Requirements:Power Requirements:
USA: 120 Volts, 60 Hz
EC: 230 Volts, 50 Hz
Power Consumption Power Consumption 570 watts
Standby Power ConsumptionStandby Power Consumption
Normal < 0.5 watts
Network Wakeup < 2 watts
BTU BTU (4 ohms, 1/8th power) 1537 BTU/h
Dimensions Dimensions (W x H x D) 430 x 97 x 414 mm
(17 x 3
7
/
8
x 16
2
/
7
ins)
Front Panel HeightFront Panel Height 2U (88.1 mm, 3
1
/
2
ins)
Weight Weight (net) 16.7 kg, 36.81 lbs.
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel Hi-Fi logo are registered trademarks of The Rotel Co., Ltd, Tokyo,
Japan.