Rotel CD11 - Specifications

13
English
Specications
Total Harmonic Distortion + Noise 0.005% @ 1 kHz
Intermodulation Distortion 0.005% @ 1 kHz
Frequency Response (± 0.5 db) 20 - 20,000 Hz
Channel Balance ± 0.5 db
Phase Linearity ± 0.5 degree
Channel Separation > 115 dB @ 10 kHz
Signal to Noise Ratio (A weighting) > 125 dB
Dynamic Range > 99 dB
Digital to Analog Converters Texas Instruments
Analog Output impedance 470 Ohms
Digital Output 0.5 Volt, Peak to Peak
Load Impedance 75 Ohms
Power Requirements (AC)
USA 120V, 60 Hz
EC 230V, 50 Hz
Power Consumption 15 Watts
Standby Power Consumption < 0.5 Watts
BTU 40 BTU/h
Dimensions (W, H, D) 430 x 98 x 314 mm
17'' x 3
7
/8'' x 12
3
/8''
Front Panel Height 80 mm / 3
1
/8''
Weight (net) 5.8 kgs, 12.7 lbs.
All specications are accurate at the time of printing. Rotel reserves the right
to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co.,
Ltd. Tokyo, Japan.