To Next PageTo Next Page
Need help?Do you have a question about the Rotel RA-820B and is the answer not in the manual?
Power Output| continuous power output | 25 watts per channel |
|---|---|
| DIN output | 35 watts per channel |
| music power | 120 watts |
Distortion| total harmonic distortion | 0.08% |
|---|---|
| intermodulation distortion | 0.08% |
| damping factor | 25 (20 to 20, 000 Hz, 8 ohms) |
Output Impedance| speaker output impedance | 4-16 ohms |
|---|---|
| headphone output impedance | 4-16 ohms |
| input sensitivity/impedance PHONO | 3.0 mV/47 kohms |
Frequency Response| PHONO frequency response | 20 to 20, 000 Hz, ±0.3 dB |
|---|---|
| CD, TUNER, TAPE frequency response | 10 to 40, 000 Hz, +1.0 dB, -3.0 dB |
| signal-to-noise ratio PHONO | 75 dB |
Power Requirements| power requirement | 120V/60 Hz, 220V/50 Hz, 240V/50 Hz |
|---|---|
| power consumption | 170 watts |
| dimensions | 430 (W) x 66 (H) x 271 (D) mm |
Welcome message and overview of Rotel audio products, emphasizing quality and design.
Instructions for safe power connection, ventilation, and handling to prevent hazards.
Detailed guide on connecting speaker leads to the correct terminals for optimal performance.
Guidance on connecting various audio components like CD players, tuners, and turntables.
Specific instructions for UK users regarding mains cable connections and wiring.
Description and function of the unit's buttons, jacks, and selector knobs.
Step-by-step guide for listening to different sources and recording audio.
Guidance on identifying and resolving hum or noise issues in the audio system.
Information on the unit's protection circuit and variable voltage capabilities.
