Need help?Do you have a question about the Rotel RA-840BX and is the answer not in the manual?
General| Input sensitivity | 2.5mV (MM), 150mV (line) |
|---|---|
| Total Harmonic Distortion | 0.03% |
| Signal-to-Noise Ratio | 100dB (line) |
| Input Impedance | 47 kΩ |
| Damping factor | 100 |
| Output | 150mV (line) |
| Speaker load impedance | 8Ω to 16Ω |
| Power Output | 40W per channel into 8Ω |
| Frequency Response | 10Hz - 100kHz (±0.5dB) |
Highlights STRAIGHT LINE loudspeaker paths and headphone usage.
Advises setting volume to zero before switching MM/MC or power.
Explains dubbing from TAPE 1 to TAPE 2 by pressing both buttons.
Thanks user, highlights Rotel's design and quality.
Covers power supply, ventilation, cabinet, installation, and cleaning.
Details speaker lead connection to L/R terminals and wire stripping.
Explains RCA connections, grounding, and turntable MC/MM inputs.
Details Power, Headphone, Mono, Tape Monitor, Function Selector, Volume.
Guides listening from turntable, CD, tuner, and tape playback.
Provides advice on identifying and resolving hum and noise problems.
Explains the circuit's purpose and what to do if no sound is produced.
Notes voltage preset and advice for changing regions.
To Next Page
