Rotel RA-913 User Manual

Important initial information and safety guidelines for the user.

Instructions for connecting speakers, including impedance considerations.

Guidance on optimal positioning of speakers for best sound.

Details on rear panel AC outlets for powering other components.

Information on using preamp and main amp sections independently.

Description of the main power on/off switch.

Explanation of the function of push-type buttons.

Switch to select speaker output (A, B, or off).

Adjusts the low frequency response.

Bypasses tone controls for a flat frequency response.

Cuts out undesirable low-frequency noise.

Adjusts the high frequency response.

Reduces low frequencies to minimize rumble.

Reduces high frequencies to minimize hiss and interference.

Allows playback and dubbing between two tape recorders.

Selects between mono and stereo audio output.

Adjusts the volume balance between left and right speakers.

Boosts low and high frequencies at low listening levels.

Adjusts the overall sound output level.

Temporarily reduces volume by 15dB.

Selects the input source for the amplifier.

Socket for connecting headphones for private listening.

Visual indicators displaying the amplifier's output power.

Instructions for copying audio from one tape to another.

Guide for recording audio onto tape from various sources.

Technical specifications for the amplifier's power output and performance.

Technical specifications for the preamplifier's input sensitivity and frequency response.

General specifications including power consumption, dimensions, and weight.