Rotel RA-935BX User Manual

STEREO INTEGRATED AMPLIFIER_
RA-935BX
owners,
manual
j
i
ENGLISH..
DEUTSGH.
FRANQAIS
WARNING
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE
Write your SERIAL NUMBER here.
The number is located near the name
plate on the rear panel.

Rotel RA-935BX Specifications

Power Output

continuous power output	40 watts per channel
DIN output	60 watts per channel
music power	110 watts

Impedance and Sensitivity

input sensitivity/impedance (CD, TUNER)	210 mV/15 kohms
overload level (CD, TUNER)	5 V
input sensitivity/impedance (AUX, TAPE)	210 mV/15 kohms

Frequency Response and Distortion

frequency response (CD, TUNER)	10 to 100 kHz, +1.0 dB, -3.0 dB
frequency response (AUX, TAPE)	10 to 100 kHz, +1.0 dB, -3.0 dB
total harmonic distortion	no more than 0.05%

Power Requirements

power requirement	120 V/60 Hz, 230 V/50 Hz, 240 V/50 Hz
power consumption	300 watts
damping factor	150 (20 to 20, 000 Hz, 8 ohms)

Weight and Dimensions

dimensions	440 (W) x 92 (H) x 347 (D) mm
dimensions (inches)	17-3/8' x 3-5/8' x 13-11/16'
weight	6.1 kg/13.4 lbs

Summary

Understanding the Controls

Volume Control Operation

Adjusts audio playback level for left and right channels.

Input Selection Controls

Manages audio source for listening and recording.

General Operation Precautions

Front Panel Controls Overview

Power Button and Indicator

Turns the unit on/off and indicates power status.

Installation and Setup

Cabinet Safety

Warning against opening the cabinet and handling internal components.

Technical Specifications

Power Output and Distortion

Details on continuous power, music power, and harmonic distortion levels.

Input Sensitivity and Frequency Response

Specifications for input sensitivity, impedance, and frequency response.

Signal to Noise Ratio

Power Amplifier Bias Adjustment

Bias Adjustment Procedure