Need help?Do you have a question about the Rotel RA 970BX and is the answer not in the manual?
Alerts users to the presence of uninsulated 'dangerous voltage' or important operating instructions within the product's enclosure.
Guidance on placing the unit on a dry, level surface, away from direct sunlight, water, and excessive humidity.
Ensuring adequate airflow by not blocking cooling vents and mounting the unit properly to prevent overheating.
Guidance on correct speaker wire polarity to ensure proper bass response and sound imaging.
Steps to diagnose hum or noise issues by unplugging source components and testing systematically.
Technical specifications including rated power, distortion, damping factor, input sensitivity, and frequency response.
General| Total Harmonic Distortion | 0.03% |
|---|---|
| Damping Factor | 180 |
| Frequency Response | 10Hz - 100kHz |
| Input Sensitivity | 150mV |
| Output | Speaker A/B |
| Dimensions | 440 x 92 x 347 mm |
| Power Output | 60W per channel (8 Ohms) |
To Next Page
