Rotel RA-920AX User Manual

Read, retain, heed, and follow all safety and operating instructions for safe and proper use of the appliance.

Avoid water, heat, and ensure proper ventilation. Mount securely if applicable, and use with appropriate carts.

Use correct power sources, protect cords from damage, and ensure proper grounding or polarization.

Clean with a dry cloth, unplug when unused, and refer all servicing and damage issues to qualified personnel.

Warnings against moisture exposure, not opening the unit, and explanations of safety symbols.

Detailed instructions for correctly wiring the 2-core mains lead for users in the UK.

Place the unit on a flat, dry surface away from humidity, vibration, heat, and direct sunlight.

Ensure the unit is connected to the correct local AC voltage; consult dealer if unsure.

Handle the power cord with care and ensure the unit's power switch is off when plugging/unplugging.

Do not open the cabinet. Clean the unit gently with a soft, dry cloth; never use solvents.

Connect audio components using RCA cables, ensuring correct left/right channel matching and grounding.

Use 4-8 ohm speakers, proper cords, and ensure correct polarity and no short circuits.

Overview of Power Button, Power Indicator, Phones Jack, Tone Controls (Bass/Treble), and Volume Control.

Adjusts volume balance between left and right speakers for equal sound level.

Selects input signal for monitoring: TAPE for tape deck playback, SOURCE for other inputs.

Chooses the audio input source for playback, excluding the TAPE input.

Precautions before operation, setting volume, monitor selector, and playing turntable/tuner.

Visual guide for connecting CD player, tuner, cassette deck, and turntable to the amplifier.

Instructions for playing CD players and tape decks, including connection and playback settings.

Guide for recording signals to a tape deck, including input selection and monitoring.

Guidance on identifying and resolving hum or noise issues caused by wiring or external interference.

Details on continuous power output, music power, and total harmonic/intermodulation distortion.

Specifications for input sensitivity, impedance, overload levels, and frequency response.

Specifications for bass/treble tone controls and signal-to-noise ratios for different inputs.

Information on power requirements, consumption, dimensions, weight, and disclaimers.